Product introduction:

Waterborne epoxy curing agent BEH1350 is an admixture of water-dispersible amines that, when diluted to excess, produces a translucent emulsion. The curing agent is non-ionic, and there is no special requirement for the selection of various additives and fillers. Epoxy resin with good emulsifying liquid, compared with general waterborne epoxy curing agent, its advantage is that it can be equipped with several millimeters thick self-leveling paint, good leveling, smooth, no cracking.

Product features:

1. Non-ionic type, you can choose a variety of ionic auxiliaries and fillers with acid and alkali.
2. Low viscosity, can add more fillers, the preparation of high base ratio of paint.
3. Fast drying and curing speed, especially in winter, high hardness and gloss, good impact and elasticity.
4. There is a visible period of application.
5. Good adhesion to various substrates (concrete, metal, old coating, etc.).
6.BEH1350 self-leveling coating construction and traditional solvent-free self-leveling the same.

Application scope:

1.Thick coating self-leveling paint
2.Mortar floor coating
3.Thin self-leveling coating
4.Metal anticorrosive coating
5.Cement mortar modified coating

Product specification:

Appearance: light yellow viscous liquid at normal temperature

Color(gardner method): ≤6

Active ingredient content (wt %): 50±2.0

Viscosity (mPa.s 25℃): 550-2000

Density (g/cm³): 1.05-1.10

PH: 8-9

Active hydrogen equivalent (in product form): 330

Proportion to epoxy resin (mass ratio): BER1398: BEH1350=100:166.67

Dilute solvent: deionized water, distilled water and organic solvents such as ketones, lipids and ethers that can dissolve epoxy resin

Recommending formula: if you need the technical formula of coating products, please fax the technical department of our company to get it.

Validity: 12 months in cool and ventilated environment at room temperature.

Packing specification: this product uses 25KG, 50KG, 200KG plastic drum.

Legal declaration: this information is based on our knowledge and provide, the specific production formula and production process by each manufacturer according to their own needs before the production of the test, we can not be used as legal guarantee.